This is the installation manual for android navigation for Mercedes Benz C class W204/S204/C204 2011-2013 with NTG 4.5, it is the same installation steps for both left hand drive and right hand drive car types. If you interest to buy the android screen GPS navigation, please click here.
The android screen will just replace the factory screen,the original radio head unit will keep in the car, thus all original functions work same as before. To keep original functions, it need to make some settings in NTG setting interface, please click here to view more details.
1, Remove the trim around the AC outlet. Then use a screwdriver insert into the AC outlet and make the clip to the middle side ( so that to remove the trim of AC outlet).
2, Remove the AC outlet and disconnect the connector on the back of AC outlet.
3, Remove the frame around the factory screen.
4, Remove the frame of original screen, after that, remove two fixing screws,then take off the original screen.
5, Remove the connector on the back of original screen, then remove two fixing screws for original radio head unit.
6, Disconnect the connector for the panel of radio head unit. Pull out the radio head unit, then remove the harness on the back. Connect the LVDS for the android screen.
7, Connect the power cable on the back of radio head unit. Install the android screen.
1, Before wiring the power harness to the back of android screen, you should connect the AUX Cable first.The Mercedes Benz car it have AUX or AMI , thus, there is an Adapter that switch the sound from AUX to USB, click here to read details for AUX to USB installation.
2, About the installation of GPS antenna & 2 wifi antenna, normally, you can install them on the right side of dashboard，the wifi antenna can install under the glove box,remove the 3M sticker and tape it to the metal inside of the glove box. For GPS antenna.