This is the installation guide for android screen GPS navigation for Mercedes Benz SLK 2009-2015, it is plug & play,no cutting wires, no modification for original cars. The installation will just replace the factory SLK screen,the original head unit will maintain in the car, thus all original functions work same as before.
To keep original functions, it need to make some settings in NTG setting interface, please click here to view more details.
1. Remove the frame for original screen: push the original car baffles to central direction and remove them. Remove the fixing screws of original screen.
2, Pry out the Air conditioner panel and remove it, remove the fixing screws of original screen, take out the original screen and unplug the power cable on the back.
3, Pry out the gear panel and remove the fixing screws,pry out the dashboard panel and remove it, remove the fixing screws of original car head unit.
4, Remove the head unit and unplug the power cable on the back. Wiring the power harness and installation is done.
1, Before wiring the power harness to the back of android screen, you should connect the AUX Cable first.The Mercedes Benz car it have AUX or AMI , thus, there is an Adapter that switch the sound from AUX to USB, click here to read details for AUX to USB installation
2, About the installation of GPS antenna & 2 Wi-Fi antenna, normally, you can install them on the right side of dashboard，the Wi-Fi antenna can install under the glove box,remove the 3M sticker and tape it to the metal inside of the glove box. For GPS antenna.